hi limits

View as Grid List
Sort by

Hi-Limit Assembly, Hydro-Quip, Pre-wired Harness 48-0092S

Hydro Quips two part hi-limit utilizes a self resetting hi-limit along with a manual reset. Both pieces must be replaced as a set. This hi-limit is used in most air activated control systems made prior to 2008. 47-355-1125 48-0092S
$25.91

Hi-Limit, 1/4" dia, 12"Capillary, SPST, Screw Terminal, 25A 275-3287-00

Hi LimitsSingle pole rated at 25 amps with temperature rating set at 121°F. Best results are obtained when the bulb is installed in a dry well or groove tube at or immediately before the heater12" capillary length, 1/4" bulb thicknessThis is a safety device! If it is found to be out of calibration, do not attempt to perform a field adjustment! Replace bad hi limit with a new one 47-335-1080 275-3287-00
$28.66

Hi-Limit, 1/4" dia, 36"Capillary, SPST, Screw Terminal, 25A 275-3288-00

Hi LimitsSingle pole rated at 25 amps with temperature rating set at 121°F. Best results are obtained when the bulb is installed in a dry well or groove tube at or immediately before the heater36" capillary length, 1/4" bulb thicknessThis is a safety device! If it is found to be out of calibration, do not attempt to perform a field adjustment! Replace bad hi limit with a new one 47-335-1081 275-3288-00
$32.00

Hi-Limit, 5/16" dia, 12"Cap, SPST, Screw Terminal, Coates 61L/E-6 22003820

Hi LimitsSingle pole rated at 25 amps with temperature rating set at 121°F. Best results are obtained when the bulb is installed in a dry well or groove tube at or immediately before the heater12" capillary length, 5/16" bulb thicknessThis is a safety device! If it is found to be out of calibration, do not attempt to perform a field adjustment! Replace bad hi limit with a new one 47-225-1605 22003820
$52.50

Hi-Limit, 5/16" dia, 36"Capillary, SPST, Screw Terminal, 25A 275-2662-10

Hi LimitsSingle pole rated at 25 amps with temperature rating set at 121°F. Best results are obtained when the bulb is installed in a dry well or groove tube at or immediately before the heater36" capillary length, 5/16" bulb thicknessThis is a safety device! If it is found to be out of calibration, do not attempt to perform a field adjustment! Replace bad hi limit with a new one 47-335-1083 275-2662-10
$30.59

Hi-Limit, Thermodisc, DPST, Screw Terminal, Surface Mount 34-0058-K

ThermodiscSurface mount hi limit 121°F DP 50 amp 240v 47-555-1000
$62.60