impellers

Hayward Pump ImpellerClosed face impeller made for the Northstar SP4000 pool pump by Hayward. Rated at 2.5hp, it is used in a Northstar SP4000 pump body, and must be installed on a 2.5hp (or greater) C-face motor with a threaded shaft. Shaft seal included 35-150-3238 SPX4025C

Jacuzzi/Carvin Pump Impeller Closed face impeller made for the J series spa pump by Jacuzzi. Rated at 3.0hp, it is used in a J series pump wet end, and must be installed on a 3.0hp (or greater) thru bolt motor. Also used in the JCM, K, and KM series pumps. Shaft seal sold separately 35-360-1100 B913000

Jacuzzi/Carvin Pump Impeller Closed face impeller made for the Piranha series spa pump by Jacuzzi. Rated at 4.0hp, it is used in a Piranha pump body, and must be installed on a 4.0hp (or greater) thru bolt motor. Shaft seal sold separately 35-105-1478 05-0365-04-R

Jacuzzi/Carvin Pump ImpellerClosed face impeller made for the Magnum High Flow pool pump by Jacuzzi. Rated at 1.0hp, it is used in a Magnum pump body, and must be installed on a 1.0hp (or greater) C-face motor with a threaded shaft. Also fits Magnum Force/3, Jacuzzi P, and R series pumps. Includes the diffuser. Shaft seal sold separately 35-105-1210 05-3802-09-R

Jacuzzi/Carvin Pump Impeller KitClosed face impeller made for the P and PH series pool pumps by Jacuzzi. Rated at 1/2hp, it is used in a P or PH volute, and must be installed on a 1/2hp (or greater) C-face motor with a threaded shaft. Includes the diffuser. Shaft seal included 35-105-1391 24-0108-03-K

Jacuzzi/Carvin Pump Impeller KitClosed face impeller made for the P and PH series pool pumps by Jacuzzi. Rated at 3/4hp, it is used in a P or PH volute, and must be installed on a 3/4hp (or greater) C-face motor with a threaded shaft. Includes the diffuser. Shaft seal sold separately 35-105-1392 05380100K

Jacuzzi/Carvin Pump Impeller KitClosed face impeller made for the P and PH series pool pumps by Jacuzzi. Rated at 1.5hp, it is used in a P or PH volute, and must be installed on a 1.5hp (or greater) C-face motor with a threaded shaft. Includes the diffuser. Shaft seal sold separately 35-105-1394 05380308K

Jacuzzi/Carvin Pump Impeller KitClosed face impeller made for the P and PH series pool pumps by Jacuzzi. Rated at 3.0hp, it is used in a P or PH volute, and must be installed on a 3.0hp (or greater) C-face motor with a threaded shaft. Includes the diffuser. Shaft seal sold separately 35-105-1396 05380506K

American Products/Pentair Pump ImpellerClosed face impeller made for the Maxim pool pump by American Products/Pentair. Rated at 2.0hp, it is used in an Maxim pump volute, and must be installed on a 2.0hp (or greater) thru bolt motor. Shaft seal sold separately 35-110-1026 39153500

The Waterway Spa Flo wet ends and parts have been discontinued. Some parts are interchangeable with the AquaFlo FMHP. Change Notes: Impellers: Interchange but require Wear Ring, Gecko AquaFlo FMHP/FMCP/TMCP. The Waterway Spa Flo did not require a wear ring. O-Rings and Faceplate Screws: Directly interchange Body Parts: Body parts are not interchangeble. If body parts are in need of replacement, a complete wet end will be required. Click below for a complete list of FMHP parts. AquaFlo Flo-Master FMHP Series Side Discharge Spa Pump 35-270-1720 310-4090

Waterway Viper Pump ImpellerClosed face impeller made for the Viper pump by Waterway Plastics. Rated at 5.0hp, it is used in a Waterway Viper pump wetend, and must be installed on a 5.0hp (or greater) thru bolt motor. Shaft seal sold separately 35-270-1742 310-2280

Waterway Workman Pump ImpellerClosed face impeller made for the Workman above ground pump by Waterway Plastics. Rated at 1.0hp, it is used in a Waterway Workman pump wetend, and must be installed on a 1.0hp (or greater) thru bolt motor. Shaft seal sold separately 35-270-1564 310-1030

Polaris/Zodiac Pump Impeller Closed face impeller made for the Halcyon Booster Pump by Polaris/Zodiac. It is used exclusively in the Polaris Halcyon model PB4-60Q Booster pump volute and installed on a 3/4hp motor. Shaft seal sold separately 35-100-1053 P16

Acura Spa Pump ImpellerClosed face impeller made for the Aquaheat Plus and Magnaflow spa pumps by Acura Spa. Rated at 2.0hp, it is used in an Aquaheat Plus and/or Magnaflow pump wet end, and must be installed on a 2.0hp (or greater) thru bolt motor. Shaft seal sold separately 35-142-1120 820-M

Acura Spa Pump ImpellerClosed face impeller made for the Aquaheat Plus and Magnaflow spa pumps by Acura Spa. Rated at 3.0hp, it is used in an Aquaheat Plus and/or Magnaflow pump wet end, and must be installed on a 3.0hp (or greater) thru bolt motor. Shaft seal sold separately 35-142-1122 821-M

Acura Spa Pump ImpellerClosed face impeller made for the Aquaheat Plus and Magnaflow spa pumps by Acura Spa. Rated at 3.25hp, it is used in an Aquaheat Plus and/or Magnaflow pump wet end, and must be installed on a 3.25hp (or greater) thru bolt motor. Shaft seal sold separately 35-142-1124 822-M

Acura Spa Pump ImpellerClosed face impeller made for the Aquaheat Plus and Magnaflow spa pumps by Acura Spa. Rated at 4.5hp, it is used in an Aquaheat Plus and/or Magnaflow pump wet end, and must be installed on a 4.5hp (or greater) thru bolt motor. Shaft seal sold separately 35-142-1128 824-M