switches, flow

Flow Switch Aqualarm 1-1/2" Female Pipe Thread 1A 206-PVC-NOT

Flow Switch, Aqualarm, 1-1/2"fpt, 1A 26-374-1100 206-PVC-NOT

$63.70

Flow Switch Aqualarm 2" Slip 1A 200-NOS-PVC

Liquid Flow DetectorRated at one amp normally open switch 26-374-1020 200-NOS-PVC

$83.04

Flow Switch Cap, Aqualarm 200 Models 40053

Flow Switch Cap, Aqualarm 200 Models 27-374-1012 40053

$9.20

Flow Switch Cap, Aqualarm 206 Models 40051

Flow Switch Cap, Aqualarm 206 Models 27-374-1010 40051

$8.49

Flow Switch, Grid Controls M-1, 1A, 1-1/2" Slip 57-F4-1000-WHT

Model 1 Liquid Flow Detector1-1/2" pvc s x s, rated 1 amp, mount horizontal only. 14gpm minimum flow required 26-340-1021 M-1

$93.34

Flow Switch, Grid Controls M-2 Pilot Duty, 1-1/2" Slip 57-F1-2000-WHT

Model 2 Liquid Flow Detector1-1/2" pvc s x s set point 8-12gpm, pilot duty only 26-340-2100 M-2

$91.96

Flow Switch, Grid Controls M-225, 25A, 115v, 2" Spigot 57-F1-2225-00W

Flow Switch, Grid Controls M-225, 25A, 115v, 2"spg 26-340-2002 57-F1-2225-00W

$130.21

Flow Switch, Harwil Coates Q8DS/A, 1" Male Pipe Thread, 15A 23000102

Flow Switch, Harwil Coates Q8DS/A, 1"mpt, 15A 26-578-1001 23000102

$125.62

Flow Switch, Harwil Q12DS, 1/2" Male Pipe Thread, 2A Q12DS501.54SNO1

Harwil Q12DS Flow Switch 1/2" NPT2 amp pilot duty switches on at 10 gpm and switches off at 8 gpm. ABS body, stainless spring armKit includes one each 60-555-1225, 1/2" strain relief connector&one 1/2"fpt x 1/2"fpt coupling.Stationary arm measurements:2" Distance between end of the arm and bottom of the threads2-5/8" Distance between end of the arm and top of the threads 26-578-1100 Q12DS501.54SNO1

$61.44

Flow Switch, Harwil Q8DS, 1"mpt, 25A, w/Drag Strip Q8DS/A/10502

Q8DS Flow Switch25 amps- minimum flow rate, 8gpm. Wide operating range - 5 to 80 GPM, Pipe Size 1 1/2" or 2". 1"npt threaded fitting 26-578-1000 Q8DS/A/10502

$62.24

Flow Switch, Sundance Repl, 3/4" Barb Tee, 1 Pump, Generic Q12DSC2/SUND857

2 Barbed with Box End Connectors without Plug Additional Details: -Flow Switch with Transparent Tee Fitting -SPST Contact Rating 10Watts. Voltage is 30 VAC/60VDC. -3/4" Barbed -Note: If your flow switch has a barb fitting (3/8") off the bottom of the tee then you need to order the AI # SD6560-860 / MFG # 6560-860 Flow Switch Used On the Following Spa Models: -All 1-Pump Sundance® Spas with the AI # SD6500-301/ MFG # 6500-301, AI # 6500-310 / MFG # 6500-310 Heater (Except for 2001+ Capri) 26-455-1000 6560-857 , Q12DS-C2 , Q12DSC2/SUND857 , SD6560-857

$61.44