tools

View as Grid List
Sort by

Drain Plug Wrench, Pent Am Prod Clean & Clear/FNS 192019

Clean & Clear Drain Plug ToolReaches the hard to access drain plug with added leverage for extra tight plugsUse on Pentair Clean and Clear Filter for drain plug removal(e.g. Pentair) 14-110-1550 192019
$35.61

Tool Multimeter Digital with Leads 99-363-1200

Wavetek MultimeterAC voltage range 0 to 500 voltsDC voltage range 200 mv to 1000 voltsResistance range 200 sl to 2 mslCan test diodesOver load protection 200 hours battery life with alkaline batteryBattery and test leads included1 year warranty 99-363-1200
$18.69

Tool Pool Tool Allen Wrench 119

Hex Wrench Holder7" all over length 99-361-1175 119
$2.20

Tool Pool Tool Shaft Puller 100

Shaft Puller 99-361-1000
$130.44

Tool Socket Quad-Side A/Solar Side B MT-101

MT-101 is a lightweight, poly-carbonate, two-sided socket that works with a wide range of fastening devices. This socket fits the hardware on seven different filters and pumps. Attach with any 3/8” drive ratchet or your portable drill and see the knob removed with ease. 99-615-1022
$44.00

Tool Socket Set Multi-Tork 3 Items MT-301

MT301 Includes 3 lightweight poly-carbonate sockets. Just match the Multi-Tork socket to your equipment’s clamping system, attach to a portable drill or driver, and see the clamps removed instantly. This value pack offers three tools in one convenient pack. MTJ-770 for use on: Systems equipped with 2-1/4" or 3" knobs. Sta-Rite System 3 models 75 and 110 MT-100 for use on: 7/8" hex nuts 9/16" hex nuts Purex Triton Nautilus Pentair American Products Hayward Pro Grid and Micro-Clear series. MT-101 for use on: Sta-Rite pumps, Posi-Flow filters, Mytilus, Pentair, R.G. Ray, Pac-Fab, Qwik-Clean, Paramount, Cal-Pump, Wet Institute, Caretaker, and Pool Valet. 99-615-1026 MT-301
$109.46

Tool, Allen Wrench, Safety Cover, 1/4", 28"l HRSC213

Tool, Allen Wrench, Safety Cover, 1/4", 28"l 99-366-1045 HRSC213
$15.21

Tool, Allen Wrench, Safety Cover, 3/16 HRSC212

Tool, Allen Wrench, Safety Cover, 3/16 99-366-1040 HRSC212
$13.58

Tool, Assist Wrench, Hydro Air JRA2916

Jet Removal Assist ToolUse tool to provide extra leverage when removing jets with Hydro-Air plastic jet tool. Tool fits contour of plastic tube without strippingUse on Hydro-Air Slimline wrench for spa jet work. (e.g.HYA-107825) 99-366-1095 JRA2916
$26.09

Tool, Bearing Puller Adapter 202 Series TGP-202

Bearing Pullers AdapterWhere bearings are recessed and cannot be held by the separator, the carefully machined high-grade steel adapters can be slipped on the bearing in seconds; the adapter ring is then set to contain the bearing 99-125-1009 TGP-202
$185.46

Tool, Bearing Puller Adapter, 203 Series TGP-203

Bearing Pullers AdapterWhere bearings are recessed and cannot be held by the separator, the carefully machined high-grade steel adapters can be slipped on the bearing in seconds; the adapter ring is then set to contain the bearing 99-125-1012 TGP-203
$393.46

Tool, Bearing Puller Adapter, 204 Series TGP-204

Bearing Pullers AdapterWhere bearings are recessed and cannot be held by the separator, the carefully machined high-grade steel adapters can be slipped on the bearing in seconds; the adapter ring is then set to contain the bearing 99-125-1015 TGP-204
$173.26

Tool, Bearing Puller Adapter, 304 Series TGP-205

Bearing Pullers AdapterWhere bearings are recessed and cannot be held by the separator, the carefully machined high-grade steel adapters can be slipped on the bearing in seconds; the adapter ring is then set to contain the bearing 99-125-1018 TGP-205
$298.94

Tool, Clamp-On Multimeter, Tenma, with Sensor and Leads 47M2998

MULTIMETER, DIGITAL, CLAMP, 3-1/2 DIGIT DMM Type:Clamp Voltage Measuring Range DC:200mV to 600V Voltage Measuring Range AC:2V to 600V Current Measuring Range AC:2A to 400A Temperature Measuring Range:-40°C to +1000°C 99-242-1100 47M2998
$58.48

Tool, Cord Stopper, 1 Hole, for 1" Light Niche Q-CS2

Cord Stopper 1" NicheEliminate water leaks at pool light forever. Slide in cord and push into conduit. Never mess with putty or silicon again.Use on any underwater light niche where leaking is a problem. 99-366-1005 Q-CS2
$5.42

Tool, Cord Stopper, 1 Hole, for 3/4" Light Niche Q-CS1

Tool, Cord Stopper, 1 Hole, 3/4" 99-366-1000 Q-CS1
$4.78

Tool, Cord Stopper, 2 Hole, 1" Q-CS10

Tool, Cord Stopper, 2 Hole, 1" 99-366-1140 Q-CS10
$5.65

Tool, Cutter, Vinyl and Hose, 2" 4682

Vinyl Tubing Cutter 99-362-1100 4682
$20.21

Tool, Fluke, MiniTemp Infrared Thermometer FLUKE 62 MAX

Fluke Minitemp IR ThermometerInfrared temperature measurement at an economical priceRange –30 to +500°C (-20 to 932°F)Fixed emissivity (0.95)Large backlit display with °C/°F readoutPocket-sized, easy to usePowered by single 9v battery (included) 99-363-1000 98142TE
$245.96

Tool, Hand Crimping, Multi Purpose, Molex AMP 31F1049

AMP Style Connector Part/Tool 99-322-1020 31F1049
$32.01